Our company offers a development and supply of complete technological lines for production of powdered sulfur - technologically sophisticated milling product.
Complexity of ground sulfur: when the particles hit the ball burst - break down, but as t the melting of sulfur is very low, so the heating and sealing it back into a lump, which are glued balls. If the attacks are very weak, then grinding a long and inefficient. If we use the cooling, the process turns out quite expensive. If the grinding carried out in a liquid - it then we should get rid of fluid. When grinding in flow systems is the same situation - at high speed just melted sulfur and stick. At low speed grinding almost goes, and the product will be small.
Are needed simultaneously: a low speed impact, timely removal of the product, no additional operations, low cost maintenance machines.
in special versions, and if configured to - this is the ideal mill for grinding of sulfur. Sulfur can be crushed by EMC to almost superfine sulfure, although consumers usually sufficient fineness of the order of 1-60 micron, which exceeds the requirements of standards for sulfur.
Performance of one mill for grinding sulfur regulated depending on the customer's requirements and can range from 1 kg to two or three hundred kilograms per hour of electricity at a cost of no more than 50kW * hour per ton of finished product. The equipment allows the grind sulfur in a controlled atmosphere (eg nitrogen or argon) with a minimum consumption of gas for maximum process safety. The line does not require additional cooling equipment, and any aspiration systems. Good chops as granular sulfur, and com. Allows you to receive three fractions simultaneously with the desired grain size, including the submicron level. The equipment is designed for continuous operation, on the basis of the top raw material - finished at the bottom of the faction.